CHECKLIST GOAL TM 400M1SD : GRAPHING STARTER DRAW TEST AVERAGES

NAME__________________________________DATE_____________________

_____1. READ GOAL TM400M GENERAL PROCEEDURES AND VIEW "VAT 40" VIDEO _____2. ATTEND INSTRUCTOR LECTURE/DEMO ON THE OPERATION OF THE "VAT 40" THE IMPORTANCE OF COLLECTING ACCURATE DATA.

_____3. REVIEW SAMPLE GRAPHIC PLOT OF STARTER DRAW TEST VALUES IN WORKSHEET BELOW.

_____4 CHECK WITH YOU INSTRUCTOR FOR A VEHICLE TO TEST. USING "MITCHELL ON DEMAND" FIND DATA RELATED TO STARTER TESTING FOR YOUR SPECIFIC VEHICLE AND RECORD THE MAXIMUM AMPS AND MINIMUM ACCEPTABLE VOLTAGE ON A TM400M WORKSHEET BELOW.

_____5. OBTAIN A COPY OF THE "VAT 40 MANUAL" AS A REFERENCE IF YOU ARE UNSURE OF HOW TO DO A BATTERY LOAD TEST.

**REMEMBER YOU MUST CHARGE YOUR BATTERY TO 12 VOLTS BEFORE TESTING. IF YOU ARE UNSURE OF THE SAFE WAY TO CONNECT A BATTERY CHARGER, REVIEW THE CORRECT METHOD WITH YOUR INSTRUCTOR!!**

_____6. COMPLETE THE STARTER DRAW TEST RECORDING VOLTAGE VALUES AT THE FOLLOWING INTERVALS: AT THE START OF THE TEST OR 0 SECONDS, 5 SECONDS, 10 SECONDS, 15 SECONDS AND 20 SECONDS.

**SAFETY NOTE: IF AT ANY TIME THE VOLTAGE DROPS BELOW 7.0 VOLTS TURN THE LOAD CONTROL OFF AND RECHARGE YOUR BATTERY BEFORE FURTHER TESTING**

_____7. FOR A VALID AVERAGE STARTER DRAW TEST LINE ON YOUR GRAPH YOU NEED TO REPEAT THIS TEST 3 TIMES AND RECORD YOUR VOLTAGE VALUES ACCURATELY AT THE CORRECT TIME INTERVALS. REMEMBER YOUR BATTERY MUST BE CHARGED UP TO AT LEAST 12 VOLTS BEFORE YOU START TESTING!!!

_____8. WHEN YOU HAVE COMPLETED YOUR STARTER DRAW TEST SHEET. SEE YOUR INSTRUCTOR HE WILL SHOW YOU HOW TO INPUT DATA INTO "MICROSOFT EXCELL" SO YOU CAN PRINT YOUR GRAPHS OF STARTER DRAW TESTS AND AVERAGE VALUES.

 _____9. SEE YOUR INSTRUCTOR SO HE CAN TELL YOU WHICH GRAPHS YOU WILL NEED TO PRINT SO YOU CAN GET A SIGNATURE BELOW AND RECEIVE CREDIT FOR THIS GOAL.

INSTRUCTOR_________________________DATE________________

 

 TO SHOP WORKSHEET ON STARTER TESTING tm400msdshopg1.htm

BACK TO MAIN tcdauto.htm